Dabekausen to distribute Major hedge trimmers in Benelux and Germany

ADVERTORIAL

ENTREPRENEURSHIP

Heleen Kommers, Tuesday 14 July 2026

109 sec

Partnership further expands range of solutions for professional green management

Dabekausen will distribute hedge trimmers from Major Equipment in the Benelux and Germany. With this partnership, the supplier of professional green management machinery further expands its product range. Dabekausen will also take care of the distribution, service and support of Major machines in this region.

POWER MJ39-143 hedge trimmer

Dabekausen has been an importer of McConnel in the Benelux for many years and supplies machinery for roadside and green management. By adding Major products, the company aims to respond to the demand for efficient solutions for maintaining hedges, shrubs and verges.

Experience in hedge maintenance

According to Dabekausen, the partnership builds on the knowledge the company has developed over recent years. In 2004, the company introduced its first hedge-cutting decks. Its experience with arm technology and its existing service network provide a strong foundation for expanding the product range.

Dabekausen expands its product range with Major hedge trimmers

Cutting instead of flail mowing

The Major MJ39 series uses a cutting system with double rotors and overlapping blades. According to the manufacturer, this allows hedges, shrubs and heavily overgrown verges to be cut and finished in a single pass.
Unlike a traditional flail mower, the machines cut the vegetation instead of striking it. According to Major, this results in a cleaner finish and can reduce the number of passes, fuel consumption and working time.

According to Major, the machines provide a cleaner finish and require fewer passes

Wide range of applications

The hedge trimmers can be mounted on both mowing arms and excavators and are suitable for various applications, from verge management to cutting back overgrown vegetation. The machines are built with Strenx structural steel and Hardox wear parts, which according to the manufacturer contribute to a long service life and limited maintenance costs.
Director Jeroen Huijsmans of Dabekausen calls the partnership a logical step. 'With Major, we are adding an innovative and productive solution that matches the requirements of modern users.' Johannes Ballast, sales manager Europe at Major, also describes the cooperation as a good match. According to him, Dabekausen's technical knowledge and market position make the company a suitable partner for further expanding the hedge trimmers in Northwest Europe.

SPECIFICATIONS

MODEL	MJ39-080	MJ39-143	MJ39-080-D	MJ39-143-D
	Power Arm Model	Power Arm Model	Digger Model	Digger Model
			(2.5 ton +)	(10 ton +)
Total width	0.92m	1.60m	0.92m	1.60m
Working width	0.80m	1.43m	0.80m	1.43m
kW	21HP motor	36HP motor	21HP motor	36HP motor
Required oil flow	Min. 50 litres/min	Min. 80 litres/min	Min. 50 litres/min	Min. 80 litres/min
Cutting height	10-100mm	40-100mm	10-100mm	40-100mm
Rotors	1	2	1	2
Number of blades	4 per rotor	4 per rotor	4 per rotor	4 per rotor
Weight	182kg	422kg	182kg	504kg
Speed	82 m/s	82 m/s	82 m/s	82 m/s
Compatible with	N/A	N/A	2.5-10 ton*	10-14 ton*
*Depending on oil flow and lifting capacity

Features

		Each rotor has four blades for excellent cutting and mulching performance
		Hydraulic motor with freewheel coupling, 80-110 l/min oil flow and maximum 170 bar pressure
		Fewer wear parts than flail mowing systems. A machine with low maintenance requirements
		Strenx high-quality steel components
		Hardox wear-resistant skids
		Full-width rear roller to prevent cutting too low during verge work, adjustable when trimming hedges
		Adjustable front hood (hydraulic or manual) to control the amount of material being cut

POWER MJ39-143 hedge trimmer: excavator with attachment

This article was previously published on 13 July 2026 on the website of Stad + Groen.

J.J. Dabekausen BV

Major Equipment

COMMENTS

There are no comments yet.

tip the editors